Most standard orders take 2-4 weeks and ship from Ontario, California
The Regal Corten Steel Fire Pit by The Outdoor Plus comes in 48-, 54- and 60-inch lengths, all measuring 24 inches wide and 13 inches high. Its straight-sided steel body frames a recessed linear burning area, with a rust-toned surface that changes through outdoor exposure.
The 48-inch model has a 34-by-10-inch burning area and listed 115,000 BTU input. The 54-inch version extends the opening to 40 inches and lists 135,000 BTU; the 60-inch version extends it to 48 inches and lists 165,000 BTU. Moving up a size increases both burning-area length and burner input without widening or raising the body.
Design & Construction
The flat surround and broad vertical faces leave the corten surface exposed around and below the media bed. Variations in rust tone remain visible when the fire is off rather than being concealed beneath a uniform painted finish.
Choose corten for a developing patina, not an exact, permanent color match. A physical sample can help coordinate the starting palette with paving, timber and upholstery, but it cannot predict how every face will weather in your setting. Allow for differences between enclosures when specifying several units together.
The 13-inch body height stays the same across all three lengths. Compare it with your seat cushions and the view between facing seats. Choosing a larger model extends the enclosure across the arrangement without raising the surround or burning area.
Based on the listed dimensions, the 10-inch-wide burning area leaves approximately 7 inches of surround along each long side. That width does not establish how much surface is usable during operation. Keep drinks and other objects outside the manufacturer's required clearances, and provide separate tables where guests need access while the fire is lit.
The 54-inch model offers a six-inch step between the four- and five-foot versions. Use those increments to compare the body with the available space between seats, preserving routes around both ends rather than matching the fire pit solely to sofa length.
Sizes & Specifications
Width and height remain constant across the range. Each larger model has a longer burning area, higher listed burner input and greater suggested fire-glass quantity.
| Length | Dimensions (L × W × H) | Burning Area (L × W) | Listed BTU Rating | Suggested Fire Glass |
|---|---|---|---|---|
| 48-inch | 48 × 24 × 13 in. | 34 × 10 in. | 115,000 | 36 lb |
| 54-inch | 54 × 24 × 13 in. | 40 × 10 in. | 135,000 | 42 lb |
| 60-inch | 60 × 24 × 13 in. | 48 × 10 in. | 165,000 | 50 lb |
Burning-area dimensions describe the opening, not the burner length. Fire-glass quantities are suggested ordering amounts, not media-depth instructions. Follow the requirements for the selected burner and ignition system when placing media. Listed BTU ratings describe burner input, not a guaranteed heating area.
Ignition & Fuel Options
Choose a natural gas or liquid propane configuration to match the planned gas supply. Six ignition options are available:
- Match Lit: Light the burner manually without an electrical connection.
- Match Lit with Flame Sense: Manual lighting with flame monitoring that shuts off the gas if the flame goes out.
- Low Voltage Electronic: Electronic ignition requiring a suitable low-voltage power supply.
- Plug & Play: Electronic ignition that connects to a suitable electrical outlet.
- Spark Glow: Battery-powered spark ignition without a separate lighter.
- Fire Glow: Battery-powered spark ignition with flame monitoring and automatic gas shutoff.
Select the length and ignition system before completing gas lines, electrical work or surrounding paving. Have your installer confirm supply pressure, gas-line sizing and power requirements for the exact configuration. Listed input increases from 115,000 to 165,000 BTU across the three sizes, so supply planning should use the selected model's requirements.
For propane installations, resolve the approved tank location and connection arrangement before completing the furniture layout. Do not assume that selecting propane means the cylinder fits inside the enclosure. Keep operating controls and service access reachable after seating is in place.
Decorative Media & Accessories
The Regal includes a fire pan, burner, selected ignition configuration and lava rock. Optional fire glass changes the appearance of the recessed media bed. Choose a color that works with a range of rust tones rather than one intended to match only the enclosure's initial finish.
Include the size-specific media order in the finished configuration cost. The catalog suggests 36 pounds of fire glass for the 48-inch model, 42 pounds for the 54-inch model and 50 pounds for the 60-inch model.
Catalog-listed upgrades include a Bullet Burner, canvas cover, stainless steel burner lid and glass wind guard. Each length has its own listed accessories. Specify the 48-, 54- or 60-inch body rather than estimating compatibility from the burning-area dimensions.
If choosing the Bullet Burner upgrade, confirm its input and gas-supply requirements before installation. Do not apply the standard burner's listed rating to the upgraded assembly without checking its specifications. A glass wind guard does not reduce required clearances or override restrictions on operating conditions.
Allow the unit to cool completely before fitting a lid or cover. Follow the manufacturer's finish-care instructions before using rust removers, sealers or other metal treatments. Keep ventilation openings and the burner area free of debris.
Placement & Installation
The Regal is intended for outdoor use only. Have a qualified installer confirm the supporting surface, ventilation, gas connection, required clearances and any electrical work before the unit is positioned.
Address the weathering steel's relationship to surrounding paving before installation. For pale or porous surfaces, ask the manufacturer about runoff, staining precautions and any recommended protection. Include drainage and the path of water leaving the enclosure in that review.
Mark out the full enclosure together with the manufacturer's required clearances. The 24-inch body width is not the total space needed between seats, and the low height does not reduce the required separation from the flame. Check the arrangement with people seated.
Check gates, steps and turns along the delivery route. Confirm unloading and final-placement arrangements rather than assuming delivery includes installation. Protect the enclosure from tools and nearby construction work.
For hospitality projects, include the changing corten surface in material approvals and maintenance instructions so the intended patina is not treated as a finish defect. Establish who will light and shut down the unit, maintain access for cleaning and service, and keep required circulation routes clear. Installation must follow the manufacturer's instructions and applicable local and commercial requirements.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer, and carbon monoxide and lead, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
| SPEC SHEET | Regal Corten Steel Fire Pit Spec Sheet |
|---|---|
| INSTALL GUIDE - MATCH LIT | Fire Pit Installation - Match Lit |
| INSTALL GUIDE - LOW VOLTAGE ELECTRONIC | Fire Pit Installation - Low Voltage Electronic |
| INSTALL GUIDE - PLUG & PLAY ELECTRONIC | Fire Pit Installation - Plug & Play Electronic |
No returns on made-to-order goods.
No returns on custom features, NO EXCEPTIONS.
If a product is delivered incorrectly, it is the recipients responsibility to notify TOP within 48 hours. TOP is not responsible for incorrect or damaged packages and shipments 48 hours after they have been received.
- Subjective Returns: Yes (eligible pieces only)
- Restocking Fees: 25%
- Claim Timeframe: 48 hours
For more information, see The Outdoor Plus Warranty & Policies page.
