Most standard orders take 2-4 weeks and ship from Ontario, California
The Regal Stainless Steel Fire Pit by The Outdoor Plus comes in 48-, 54- and 60-inch lengths, all measuring 24 inches wide and 13 inches high. Its straight-sided stainless steel body frames a recessed linear burning area, with six-inch size increments for fitting the enclosure to the space between seats.
The 48-inch model has a 34-by-10-inch burning area and listed 115,000 BTU input. The 54-inch version extends the opening to 40 inches and lists 135,000 BTU; the 60-inch version extends it to 48 inches and lists 165,000 BTU. Moving up a size increases both burning-area length and burner input without widening or raising the body.
Design & Construction
The Regal has a flat stainless steel surround and broad vertical faces beneath the recessed media bed. The enclosure keeps the same 13-inch height across all three lengths, so the size choice changes its horizontal proportions rather than the height of the metal body.
Compare that height with your seat cushions and the view across the lounge. Check the arrangement with people seated, particularly where the fire pit will sit between facing sofas. Furniture-frame measurements alone do not show where the surround will sit relative to the occupied seats.
Based on the listed dimensions, the 10-inch-wide burning area leaves approximately 7 inches of surround along each long side. That width does not establish how much surface is usable during operation. Keep drinks and other objects outside the manufacturer's required clearances, and provide separate tables where guests need access while the fire is lit.
The range spans four to five feet in length. The 54-inch model provides an intermediate footprint, while the 60-inch model adds a longer burning area and higher listed input. Compare those differences with the routes around both ends rather than selecting solely by sofa length.
Request a physical finish sample when coordinating the enclosure with stainless steel furniture or fixtures. Follow the manufacturer's cleaning guidance for the supplied finish rather than assuming all metal cleaners are suitable.
Sizes & Specifications
Width and height remain constant across the range. Each larger model has a longer burning area, higher listed burner input and greater suggested fire-glass quantity.
| Length | Dimensions (L × W × H) | Burning Area (L × W) | Listed BTU Rating | Suggested Fire Glass |
|---|---|---|---|---|
| 48-inch | 48 × 24 × 13 in. | 34 × 10 in. | 115,000 | 36 lb |
| 54-inch | 54 × 24 × 13 in. | 40 × 10 in. | 135,000 | 42 lb |
| 60-inch | 60 × 24 × 13 in. | 48 × 10 in. | 165,000 | 50 lb |
Burning-area dimensions describe the opening, not the burner length. Fire-glass quantities are suggested ordering amounts, not media-depth instructions. Follow the requirements for the selected burner and ignition system when placing media. Listed BTU ratings describe burner input, not a guaranteed heating area.
Ignition & Fuel Options
Choose a natural gas or liquid propane configuration to match the planned gas supply. Six ignition options are available:
- Match Lit: Light the burner manually without an electrical connection.
- Match Lit with Flame Sense: Manual lighting with flame monitoring that shuts off the gas if the flame goes out.
- Low Voltage Electronic: Electronic ignition requiring a suitable low-voltage power supply.
- Plug & Play: Electronic ignition that connects to a suitable electrical outlet.
- Spark Glow: Battery-powered spark ignition without a separate lighter.
- Fire Glow: Battery-powered spark ignition with flame monitoring and automatic gas shutoff.
Select the length and ignition system before completing gas lines, electrical work or surrounding paving. Have your installer confirm supply pressure, gas-line sizing and power requirements for the exact configuration. Listed input increases from 115,000 to 165,000 BTU across the three sizes, so supply planning should use the selected model's requirements.
For propane installations, resolve the approved tank location and connection arrangement before completing the furniture layout. Do not assume that selecting propane means the cylinder fits inside the enclosure. Keep operating controls and service access reachable after seating is in place.
Decorative Media & Accessories
The Regal includes a fire pan, burner, selected ignition configuration and lava rock. Optional fire glass changes the appearance of the recessed media bed within the stainless steel surround.
Include the size-specific media order in the finished configuration cost. The catalog suggests 36 pounds of fire glass for the 48-inch model, 42 pounds for the 54-inch model and 50 pounds for the 60-inch model.
Catalog-listed upgrades include a Bullet Burner, canvas cover, stainless steel burner lid and glass wind guard. Each length has its own listed accessories. Specify the 48-, 54- or 60-inch body rather than estimating compatibility from the burning-area dimensions.
If choosing the Bullet Burner upgrade, confirm its input and gas-supply requirements before installation. Do not apply the standard burner's listed rating to the upgraded assembly without checking its specifications. A glass wind guard does not reduce required clearances or override restrictions on operating conditions.
Allow the unit to cool completely before fitting a lid or cover. Follow the manufacturer's instructions for cleaning the stainless steel and protecting the burner and ignition components. Keep ventilation openings and the burner area free of debris.
Placement & Installation
The Regal is intended for outdoor use only. Have a qualified installer confirm the supporting surface, ventilation, gas connection, required clearances and any electrical work before the unit is positioned.
Mark out the full enclosure together with the manufacturer's required clearances. The 24-inch body width is not the total space needed between seats, and the low height does not reduce the required separation from the flame. Preserve routes around both ends with the seating occupied.
Check gates, steps and turns along the delivery route. Confirm unloading and final-placement arrangements rather than assuming delivery includes installation. Protect the finished metal from tools and nearby construction work.
For hospitality settings, establish who will light and shut down the unit and how staff will reach the controls, burner and ignition components for cleaning and service. Keep required circulation routes clear. Installation must follow the manufacturer's instructions and applicable local and commercial requirements.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer, and carbon monoxide and lead, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
| SPEC SHEET | Regal Stainless Steel Fire Pit Spec Sheet |
|---|---|
| INSTALL GUIDE - MATCH LIT | Fire Pit Installation - Match Lit |
| INSTALL GUIDE - LOW VOLTAGE ELECTRONIC | Fire Pit Installation - Low Voltage Electronic |
| INSTALL GUIDE - PLUG & PLAY ELECTRONIC | Fire Pit Installation - Plug & Play Electronic |
No returns on made-to-order goods.
No returns on custom features, NO EXCEPTIONS.
If a product is delivered incorrectly, it is the recipients responsibility to notify TOP within 48 hours. TOP is not responsible for incorrect or damaged packages and shipments 48 hours after they have been received.
- Subjective Returns: Yes (eligible pieces only)
- Restocking Fees: 25%
- Claim Timeframe: 48 hours
For more information, see The Outdoor Plus Warranty & Policies page.
